@inproceedings{Mendez2023b,
 abstract = {Current radiometric calibration procedures for thermal imaging cameras are usually performed for a single calibration geometry. The uncertainty estimated from such procedure only represents the calibration scenario and does not account for variation of the emitting source's size; this is known as the size-of-source effect (SSE). In this work, the measurements of the SSE for four thermal imaging cameras (two in the long-wavelength and two in the middle-wavelength infrared range) are presented. The investigation shows that the SSE is smaller for the middle-wavelength cameras.},
 address = {Abu Dhabi, U.A.E.},
 author = {Miguel Mendez and Jannik Ebert and Lars Sommerlade and Robert Schmoll and Andreas
Kroll},
 booktitle = {QIRT Asia 2023 - The 4th Quantitative Infrared
Thermography Conference},
 language = {english},
 month = {Oct. 30 - Nov. 3},
 mrtnote = {nopeer,3DTS},
 owner = {mendez},
 title = {Comparative Assessment of the Size-of-Source Effect in Middle and Long-Wavelength Infrared
Cameras},
 year = {2023}
}

@mastersthesis{2023-PA-Sommerlade-MessaufbauAdditiveFertigung,
 address = {Universität Kassel},
 author = {Lars Sommerlade},
 language = {german},
 month = {November},
 mrtnote = {education},
 note = {in progress},
 owner = {schmoll},
 school = {FG Mess- und Regelungstechnik},
 supervisor = {#rs#},
 title = {Multi-Kamera-Aufbau für in-process Aufnahmen in der
additiven Fertigung},
 type = {Projektarbeit Master},
 url = {https://mrt-pc1.mrt.maschinenbau.uni-kassel.de/MRT/Lehre/Aufgabenstellungen/2023-10_PA-Lars_Sommerlade-MessaufbauAdditiveFertigung.pdf},
 year = {2023}
}

@mastersthesis{2023-SemiA-Sommerlade-BeleuchtungAdditiveFertigung,
 address = {Universität Kassel},
 author = {Lars Sommerlade},
 language = {german},
 month = {November},
 mrtnote = {education},
 note = {in progress},
 owner = {schmoll},
 school = {FG Mess- und Regelungstechnik},
 supervisor = {#rs#},
 title = {Entwurf, Aufbau und Erprobung eines Beleuchtungssystems für RGB-Aufnahmen beim Laser-Pulver-Auftragschweißen},
 type = {Oberseminararbeit},
 url = {https://mrt-pc1.mrt.maschinenbau.uni-kassel.de/MRT/Lehre/Aufgabenstellungen/2023-10_SemiA-Lars_Sommerlade-BeleuchtungAdditiveFertigung.pdf},
 year = {2023}
}

@inproceedings{2023-HJS_AK-Workshop_CI-KI_RT,
 address = {Berlin, Germany},
 author = {Hanns Sommer and Andreas Kroll},
 booktitle = {33. Workshop Computational Intelligence},
 doi = {10.5445/KSP/1000162754},
 language = {german},
 month = {23.--24. November},
 mrtnote = {nopeer},
 organization = {Workshop CI},
 owner = {HjS},
 pages = {61--80},
 publisher = {KIT Scientific Publishing},
 title = {Zum Einsatz von KI-Methoden zur Lösung von Problemen
der Regelungstechnik},
 url = {https://doi.org/10.5445/KSP/1000162754},
 year = {2023}
}

@mastersthesis{2022-Sommerlade-BA-ThermografieAdditiveFertigung,
 address = {Universität Kassel},
 author = {Lars Sommerlade},
 language = {german},
 month = {Mai},
 mrtnote = {education},
 mrtnr = {272},
 owner = {schmoll},
 school = {FG Mess- und Regelungstechnik},
 supervisor = {#rs#},
 title = {Thermografische Messung dynamischer Temperaturfelder bei der additiven Fertigung von
Kunststoff},
 type = {Bachelorarbeit},
 url = {https://mrt-pc1.mrt.maschinenbau.uni-kassel.de/MRT/Lehre/Aufgabenstellungen/2022-Sommerlade-BA-ThermografieAdditiveFertigung.pdf},
 year = {2022}
}

@incollection{sommer2011CDCS,
 address = {Liège, Belgium},
 author = {Kroll, Andreas and Sommer, Hanns-Jakob},
 booktitle = {International Journal of Computing Anticipatory
Systems},
 editor = {Daniel M. Dubois},
 isbn = {2-930396-19-9},
 issn = {1373-5411},
 language = {english},
 mrtnote = {peer},
 owner = {duerrbaum},
 pages = {161-179},
 publisher = {CHAOS},
 timestamp = {2015.01.12},
 title = {Coordination of Distributed Control Systems},
 volume = {30},
 year = {2014}
}

@inproceedings{Geiger2013a,
 address = {Reykjavik},
 author = {Andreas Geiger and Hanns Sommer and Andreas Kroll},
 booktitle = {10th International Conference on Informatics in Control
Automation and Robotics
(ICINCO)},
 language = {english},
 month = {29.-31. July},
 mrtnote = {peer},
 owner = {duerrbaum},
 timestamp = {2010.07.06},
 title = {In Need of Methods to Solve Imprecisely Posed
Problems},
 year = {2013}
}

@article{sommer2010ai,
 author = {Sommer, Hanns-Jakob and Schreiber, Lothar},
 booktitle = {Chaos, Solitons \& Fractals},
 doi = {10.2478/v10229-011-0014-4},
 editor = {M.S. El Naschie},
 journal = {Journal of Artificial General Intelligence},
 language = {english},
 month = {September},
 mrtnote = {peer},
 mrturla = {https://mrt-pc1.mrt.maschinenbau.uni-kassel.de/MRT/Bibliothek/Publikationen/2012-Sommer-JAGI-Is_Logic_Mind_World-PUB.pdf},
 number = {1},
 owner = {duerrbaum},
 pages = {25-47},
 publisher = {Elsevier Ltd.},
 timestamp = {2007.11.19},
 title = {Is Logic in the Mind or in the World? Why a philosophical Question can affect the Understanding of
Intelligence},
 url = {https://versita.metapress.com/content/qm262485x7t156w8/fulltext.pdf},
 volume = {3},
 year = {2012}
}

@inproceedings{Zaidi-GMA-2012,
 address = {Dortmund},
 author = {Salman Zaidi and Andreas Kroll and Hanns-Jakob
Sommer},
 booktitle = {22. Workshop Computational Intelligence},
 editor = {Frank Hoffmann and Eike Hüllermeier},
 language = {english},
 month = {6-7. Dezember},
 mrtnote = {nopeer,FuzzyT2,pke},
 organization = {GMA-FA 5.14},
 owner = {duerrbaum},
 pages = {179-199},
 publisher = {KIT Scientific Publishing},
 timestamp = {2012.10.08},
 title = {On Description and Identification of Uncertainties in System Modeling with Fuzzy
Logic},
 url = {https://www.rst.e-technik.tu-dortmund.de/cms/de/Veranstaltungen/GMA-Fachausschuss/index.html},
 year = {2012}
}

@article{at-CI_Entkopplung-ad_ak_hs_2012,
 abstract = {Der Beitrag beschreibt die Konzeptentwicklung und das Auffinden von Koordinationsregeln für komplexe verkoppelte Systeme. Am Beispiel dieser Aufgabenstellung wird die Bedeutung der Computational Intelligence für die Systemtheorie erläutert.},
 author = {Axel Dürrbaum and Andreas Kroll and Hanns Sommer},
 doi = {10.1524/auto.2012.1029},
 journal = {at -- Automatisierungstechnik},
 keywords = {Komplexe verkoppelte Systeme, Entkoppelung,
CI-Methoden},
 language = {german},
 mrtnote = {peer},
 mrturla = {https://mrt-pc1.mrt.maschinenbau.uni-kassel.de/MRT/Bibliothek/Publikationen/2012-Dürrbaum-at-CI_Entkopplung-PUB.pdf},
 mrturlb = {https://mrt-pc1.mrt.maschinenbau.uni-kassel.de/MRT/Bibliothek/Publikationen/2012-Dürrbaum-at-CI_Entkopplung-PUB.pdf},
 number = {10},
 owner = {duerrbaum},
 pages = {600--610},
 timestamp = {2012.05.07},
 title = {CI-Methoden zur Koordination und Entkoppelung
komplexer Systeme},
 volume = {60},
 year = {2012}
}

@inproceedings{GMAGeiger2010,
 address = {Dortmund},
 author = {Andreas Geiger and Hanns Sommer and Andreas Kroll},
 booktitle = {20. Workshop Computational Intelligence},
 editor = {Frank Hoffmann and Eike Hüllermeier},
 language = {german},
 month = {1.-3. Dezember},
 mrtnote = {Netze,nopeer},
 organization = {GMA-FA 5.14 "Computational Intelligence" und GI-FG "Fuzzy-Systeme und
Soft-Computing"},
 owner = {duerrbaum},
 pages = {235-249},
 series = {Schriftenreihe des Instituts für Angewandte
Informatik / Automatisierungstechnik},
 timestamp = {2010.07.06},
 title = {Koevolutionärer Algorithmus zur Analyse struktureller Steuerbarkeit -- Eine Methode der "komplexen Netzwerke" zur
Systemanalyse},
 year = {2010}
}

@article{sommer2009csf,
 abstract = {A model for the process of knowledge acquisition is presented that shows how naive realism emerges from a quantum mechanical background. We formalise this process of emergence and obtain in this way an illustrative insight to some of the most fundamental physical theories: GRW-theory and $E^\infty$-theory.},
 author = {Sommer, Hanns-JakobLiege},
 booktitle = {Chaos, Solitons \& Fractals},
 doi = {10.1016/j.chaos.2007.04.002},
 editor = {M.S. El Naschie},
 journal = {Chaos, Solitons \& Fractals},
 language = {english},
 month = {Feburary},
 mrtnote = {nopeer},
 mrturla = {https://mrt-pc1.mrt.maschinenbau.uni-kassel.de/MRT/Bibliothek/Publikationen/2009-Sommer-CSF-Emergence_classical_reality_from_quantum_mechanical_background-PUB.pdf},
 owner = {duerrbaum},
 pages = {1027-1036},
 publisher = {Elsevier Ltd.},
 timestamp = {2007.11.19},
 title = {Emergence of classical reality from a quantum
mechanical background},
 volume = {39},
 year = {2009}
}

@inproceedings{SchreiberCAS2009,
 author = {Lothar Schreiber and Hanns Sommer},
 booktitle = {Computing Anticipatory Systems},
 editor = {Daniel M. Dubois},
 journal = {Computing Anticipatory Systems},
 language = {english},
 mrtnote = {peer},
 owner = {duerrbaum},
 pages = {189-198},
 series = {AIP Conference Proceedings},
 timestamp = {2009.07.01},
 title = {Can Mathematics be justified by Natural Logic?},
 volume = {1303},
 year = {2009}
}

@inproceedings{Schreiber2008CI,
 address = {Dortmund},
 author = {Schreiber, Lothar and Sommer, Hanns and Kroll,
Andreas},
 booktitle = {18. Workshop Computational Intelligence},
 editor = {Ralf Mikut and Markus Reischl},
 month = {Dezember},
 mrtnote = {nopeer},
 owner = {duerrbaum},
 pages = {124-135},
 series = {Schriftenreihe des Instituts für Angewandte
Informatik / Automatisierungstechnik},
 timestamp = {2008.12.09},
 title = {Lösung komplexer Systeme mittels heuristischer
Verfahren},
 volume = {24},
 year = {2008}
}

@article{DuerrbaumSommerGlaubenskalkuelAT2008,
 abstract = {Im vorliegenden Aufsatz wird im ersten Abschnitt auf die grundlegende Vorgehensweise zur Systemidentifikation eingegangen, um deren Probleme aufzuzeigen. Im zweiten Abschnitt wird das algorithmische Verfahren zur glaubensbasierten Identifikation hergeleitet. Dabei soll insbesondere der Nachweis geführt werden, dass hier im Gegensatz zu Identifikationsverfahren, die auf der Wahrscheinlichkeitstheorie basieren, alle Freiheitsgrade mittels Anwenderanforderungen eindeutig festgelegt werden können. Im dritten Abschnitt wird das Verfahren zur Prognose des Haltbarkeitsendes der Werkzeuge beim Gewindebohren eingesetzt.},
 author = {Dürrbaum, Axel and Scherm, Wolfgang and Sommer,
Hanns},
 doi = {DOI 10.1524/auto.2008.0716},
 journal = {at -- Automatisierungstechnik},
 language = {german},
 month = {Juli},
 mrtnote = {peer},
 number = {7},
 owner = {duerrbaum},
 pages = {350-356},
 timestamp = {2008.07.21},
 title = {Systemidentifikation mittels Glaubenskalkül},
 url = {https://www.atypon-link.com/OLD/doi/pdf/10.1524/auto.2008.0716},
 volume = {56},
 year = {2008}
}

@inproceedings{Busch2008CI,
 address = {Dortmund},
 author = {Busch, Martin and Schweizer, Bernhard and Sommer,
Hanns and Sommer, Vinzent},
 booktitle = {18. Workshop Computational Intelligence},
 editor = {Ralf Mikut and Markus Reischl},
 mnrtnote = {nopeer},
 month = {Dezember},
 owner = {duerrbaum},
 pages = {151--162},
 series = {Schriftenreihe des Instituts für Angewandte
Informatik / Automatisierungstechnik},
 timestamp = {2008.12.09},
 title = {Ein einfaches Berechnungsverfahren zu den Navier-Stockesschen Gleichungen -- Die Struktur berechenbarer Systeme für komplexe
Systeme},
 volume = {24},
 year = {2008}
}

@incollection{sommer2006,
 address = {Melville NY, USA},
 author = {Sommer, Hanns-Jakob},
 booktitle = {Computing Antipatory Systems},
 editor = {Daniel M. Dubois},
 language = {english},
 mrtnote = {nopeer},
 owner = {duerrbaum},
 pages = {212-221},
 publisher = {AIP Conference Proceedings},
 timestamp = {2007.12.14},
 title = {A Toy-World that satisfies some Principles of "El
Naschie's E-Infinity Theory"},
 volume = {839},
 year = {2006}
}